Lumenier OpenPilot CC3D Flight Controller【g-051】

クリックで画像を表示
クリックで画像を表示
クリックで画像を表示

クリックで画像を表示
Lumenier OpenPilot CC3D Flight Controller



QAV400にCC3Dを使用



CC3D CopterControl Hardware Features


Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM

3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer

Tiny 36mmx36mm 4 layer PCB for superior electrical noise reduction and flight performance.

Software support for Windows, Mac and Linux

Direct high speed USB support with no drivers required, a truly plug and play device.

Spektrum satellite receiver support

Futaba S-BUS hardware support

Innovative Flexi-port technology for superior port flexibility

4Mbits on-board EEPROM for configuration storage

Flexiport

CopterControl also offers the innovative Flexi-port which provides either I2C connectivity or a second serial port. Flexi-port gives CopterControl the flexibility to use either I2C and a single serial port or dual serial ports, according to your connectivity needs.


Superior user experience

OpenPilot has tried to make your experience with the CC3D as easy and trouble-free as possible. Naturally for a high-end product, the hardware is complete; there is nothing to solder. The included RC harness allows you to connect any standard PWM receiver. All CopterControl boards are tested before shipping and come with bootloader already flashed. A standard mini-USB cable (not included) is used to load the latest firmware and configure everything for your unique airframe.


The OpenPilot project, whist still young, it trying to make Open Source much more user friendly. OpenPilot software is designed to be used by everybody! All major operating systems are supported and install packages are provided. The software is all Free software under the GPLv3 license and not only are you welcome to hack it, but we encourage it!


Sensors and Components

3-axis Gyroscope array and 3-axis Accelerometer: MPU-6000

Supports several common RC inputs: 6 PWM channels, combined PPM, Spektrum/JR DSM2, DSMJ, DSMX satellites, and Futaba S.Bus receivers

Simultaneous support for multiple receivers

ReceiverPort functions (configurable): 6 PWM input channels or combined PPM stream, 4 PWM output channels

MainPort functions (configurable): serial telemetry (default), GPS, S.Bus, Spektrum/JR satellites

FlexiPort (configurable): serial telemetry, GPS, Spektrum/JR satellites, or I2C peripherals (under development)

10 PWM outputs to servos or ESC’s, or for camera stabilization

Camera stabilization: supports up to 3-axis camera mounts with stabilization and manual control from any of configured receivers

Onboard USB connectivity for easy configuration

USB and serial telemetry and configuration (including wireless with optional radio modules)

Supported by powerful OpenPilot GCS

4 Mbit onboard memory

3C Quaternion based complementary filter running at 500Hz




※今のところサポートは出来ませんので、ご理解いただきご購入お願い致します。





FC65412

この商品を買った人はこんな商品も買っています

この商品をチェックした人はこんな商品もチェックしています

ログイン・会員登録

My Cart

カートに商品は入っていません

新着商品

商品検索

お問い合わせフォーム

paypal

QAV


HQ-Prop


Skyzone