Lumenier Mini 4Power + Plus PDB (20x20mm, 5v/8v Reg, 100A Curr.)

クリックで画像を表示
XT30コネクター付き
クリックで画像を表示
クリックで画像を表示

クリックで画像を表示
Lumenier Mini 4Power + Plus PDB (20x20mm, 5v/8v Reg, 100A Curr.)



Features
Input voltage range (3S-5S operation): 8 - 21VDC
PDB: 4x20A (Max.4x25A)
Regulated 5V (1.5A, 2A Max) and 10V (2A, 2A Max) outputs
Current Sensor ~100A (Output Voltage Scaling is 317)

Specifications
2oz copper, 4-layers &1.6mm PCB.
1x Battery input, 4x ESC outputs. 2x BEC 5V outputs, 1x BEC 8V outputs.
Current Sensor, Gnd pads, Video Transmitter Signal & Gnd pads
Dimensions: 30x28(+8 with XT30)x4mm, Weight: 4.5g
Mounting holes 20mm square spacing,Φ3mm
PDB (ESC outputs)

Continuous current: 20A per output Peak current (10 seconds/minute): 25A Max per output
BEC 5V Outputs

Designed for RC Receivers, Flight controllers, OSD, and Servos.
DC/DC synchronous buck regulator.
Voltage: 5.0 +/- 0.1VDC
Continuous current: 1.5 Amps (Max.2A 10s/minute)
Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)
Short-circuit tolerant (5 seconds/minute)
BEC 8V Output

Linear regulator, very low noise. LC Filter is needless.
Designed for Video TX or FPV camera.
Stable power output even on low voltage 3s (below 12v)
Voltage: 8.0V +/- 0.3VDC (4~5S operation)
Continuous current: 1.5A@16V IN (2A Max)
Short-circuit tolerant (2 seconds/minute)
Current Sensor
~100A

Includes
1x Lumenier Mini 4Power + Plus PDB
1x XT30 power connector

この商品を買った人はこんな商品も買っています

この商品をチェックした人はこんな商品もチェックしています

ログイン・会員登録

My Cart

カートに商品は入っていません

新着商品

商品検索

お問い合わせフォーム

paypal

QAV


HQ-Prop


Skyzone