Turnigy Graphene 1300mAh 6S 65C Lipo Pack w/XT60
Specs:Capacity: 1300mAhVoltage: 6S1P / 6 Cell / 22.2VDischarge: 65C ConstantWeight: 265g (including wire, plug & case)Dimensions: 76 x 35 x 54mm Balance Plug: JST-XHDischarge Plug: XT-60U
Note: Graphene LiPo Batteries only require a standard Lipo battery charger.
Advantages over traditional Lipo batteries.• Power density: 0.15-0.17kw/kg (5Ah-16Ah)• Power density: 0.13-0.15kw/kg (1Ah-4.9Ah).• Stable High pack voltage through duration of use. • High discharge rate, giving more power under load.• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.• Greater thermal control, packs stay much cooler under extreme conditions• Higher capacity during heavy discharge.• Maintains higher pack capacity even after hundreds of cycles• Fast charge capable, up to 15C on some batteries.• Longer Cycle Life 600+
いらっしゃいませ ゲスト 様
Copyright (c) GOOD FPV All Rights Reserved