Lumenier MICRO LUX V3 F4 + 30A BLHeli_32 4in1 Stack (FC + ESC Combo)

クリックで画像を表示
クリックで画像を表示
クリックで画像を表示

クリックで画像を表示
クリックで画像を表示
クリックで画像を表示

Lumenier Micro LUX V3 F4 Flight Controller

Features
2-4S Direct Lipo input support (5-16v)
On-board BetaFlight OSD
On-board 5v/2A and 3.3v/0.2A regulators
SBUS and PPM support
RGB LED dedicated pad and Buzzer Pad
VBAT Monitoring support
3x UART Ports
Betaflight support (Supports new DSHOT protocol)
BLHeli pass-through flashing supported by hardware
Black box (flash memory to 16MB)
Specifications
STM32F405 (2MB flash) 32-bit processor
MPU6000 Gyro/Accelerometer
High quality 1.6mm PCB
Micro USB connector for programming
Dimensions: 27x27x6mm (includes USB in height)
Mounting Holes: 20mm square to center of holes
Weight: 4g

Lumenier BLHeli_32 30A 4S 4IN1 ESC

Features
New 32bit Cortex-M0 running at 48MHz
Latest Gen. firmware using BLHeli_32
2-4s LiPo battery compatible
30A per channel, 40A burst
Supports DSHOT 1200, Proshot, Oneshot125 (125-250us), Oneshot42(41.7-83.3us) and Multishot (5-25us). Auto-detection.
Lightweight, and compact size
Adaptive timing, compatible with a wide range of motors and Kv
Synchronous rectification technology adds efficiency, damped light
Powerful regenerative braking / active braking.

Specifications
Input: 2-4s LiPoly
Constant: 30 Amps (per channel)
Burst: 35Amps (per channel)
BEC: No
Dimensions: 33x36mm(including the power pads)
Mounting Holes: 20mm square to center of holes
Weight: 8g (without motor wires)

User Manual
The MICRO LUX V3 uses the LUXF4OSD target. Download Betaflight Configurator here.

Includes
1x Lumenier MICRO LUX V3 F4 + 30A BLHeli_32 4in1 Stack
Lumeneir LUX F4 + OSD Flight Controller (Designed for BetaFlight)
Lumenier 30A BLHeli_32 4in1 ESC (2-4s)
1x Set of plastic mounting hardware
4x M3x20 screws, 4x 5mm spacer, 4x 3mm spacer, 4x nuts
1x 330uF 25v Low ESR Capacitor
1x Set 16awg silicone power wire (90mm)

FC65412
SC45165

この商品をチェックした人はこんな商品もチェックしています