Beta85X 4K Whoop Quadcopter (4S) Futaba(S-FHSS)仕様

クリックで画像を表示
クリックで画像を表示
クリックで画像を表示

クリックで画像を表示
クリックで画像を表示
クリックで画像を表示

Beta85X 4K Whoop Quadcopter (4S)




BETA85Xで4K録画が可能となりました。
※トランスミッター系統図が必要であればご注文備考欄からお知らせくださいませ。


SPECIFICATION
BETA85X SPECIFICATIONS

Weight: 88.6g (without battery)
F405 V2 Flight Controller and 16A BLHeli_32 ESC
Motors: 1105 5000KV with connector
Props: 2" 4-Blades Props
Camera: CADDX Tarsier 4K
Canopy: Canopy for Tarsier 4K camera
Receiver option: Frsky XM+ / DSMX / Futaba S-FHSS / Flysky / TBS Crossfire / PNP
Recommend battery: 4S 450mAh Battery (Not including)
5.8G FPV antenna
Flight time: 4min - 6min with 450mAh 4S battery

FC SPECIFICATIONS

Find more details about this F405 V2 FC in another page.

CPU: STM32F405 (Overclock to 240MHz)
Six-Axis: MPU6000
Size: 26mm x 26mm, whoop mounting pattern
Firmware version: Betaflight OMNIBUSF4SD (OBSD)
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)


ESC SPECIFICATIONS
Find more details about this BLHeli 32 ESC board in another page.

Support BLHELI_32
Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200
Input voltage: 3-4S lipo
Cotinue current: 16A
Peak current: 19A 
Firmware target: BETAFPV-16A-32bit
MCU: STM32F051K66

Camera SPECIFICATIONS
Find more details about this Caddx Tarsier 4K camera in another page.

Weight: 19.5g
FOV: 4KF 2.8, FOV 150°(16/9), FPV FOV 165°(4/3)
Lens: Dual lens 2.8 / 12Mega
Image Sensor: 12M SONY sensor
TV System: NTSC / PAL, can be changed
Anti-Shake: Hardware anti-shake
Scene Mode: Auto / Personage / Scenery / Defog
Recording Timing Larm: OFF / 1mins / 3mins / 5mins / 10mins
Horizontal Resolution: 1200TVL
Image: 16:9 / 4: 3 (changeable)
Camera OSD: Seperate OSD
The camera tilt angle is switchable from 20 degree to 30 degree with ND8 fliter.


Related Detail

Join us on our Facebook group to share your experience: BETAFPV - Micro FPV Drones and Gears & POWER-WHOOP GROUP
Join the online discussion about our X Series Whoop drones at RCGroups.com: Beta65X   Beta75X   Beta85X
Know more about cine whoop from NURK FPV's blog.
FAQ
1. Update Cli Dump of Beta85X 4S. ( Click here to find the details) 

2. How to set up SmartAudio vtx control?

The set up is default when producing.  Multirotor Guide gives you the most straightforward explanation.

PACKAGE
1 * Beta85X 4K Whoop Quadcopter(4S)
1 * ND8 Fliter for Tarsier 4K camera
1 * OSD Menu Board
There are no batteries included for all version. High recommend the 450mAh 4S battery.

※入荷しましたので即発送できます。

この商品を買った人はこんな商品も買っています

この商品をチェックした人はこんな商品もチェックしています

ログイン・会員登録

My Cart

カートに商品は入っていません

新着商品

商品検索

お問い合わせフォーム