HX115 115mm HD Toothpick Drone / Futaba



HX115 115mm HD Toothpick Drone / Futaba

Weight: 74.3g (without battery)
FC&ESC:Toothpick F4 2-4S 12A AIO FC
Motors: 1105 5000KV Brushless Motors
Props: HQ 3020 2-Blade Props / HQ 3030 3-Blade Props
Camera: Runcam Split 3 Nano
VTX: A01 25-200mW 5.8G VTX
Frame: HX115 T700 carbon fiber frame
Canopy: Canopy for HX115
Receiver Option: Frsky XM+  / DSMX / Futaba S-FHSS / Flysky / TBS Crossfire
Battery: 450mAh 4S battery / 450mAh 3S battery (NOT included)
Flight time: Almost 5mins in a smooth flight

Toothpick F4 2-4S AIO Flight Controller
The first carbon fiber drone series that installs a new layout all-in-one Toothpick FC, makes this ideal for tight builds and achieves mini stack height. Possesses high-performance STM32F411CEU processor and tuned Betaflight MATEKF411 (MK41), which provides much more power on 2-4S. 

Runcam Split 3 Nano Camera and A01 VTX
The RunCam Split 3 Nano, Ultra-low weight 10g, gives you 1080p/60fps HD recording while also utilizing a sharp WDR FPV camera. In order to accommodate toothpick class drone, Betafpv customized shorter RunCam lens length, which can prevent lens damage during flight. For more instruction, click here to reach.

Specifications of Camera
Weight: 10g
1080P/60fps HD recording & WDR FPV camera
Anti-drop SD card
Wide voltage range (5-20v)
Stronger flexible ribbon cable
Power-off protection for video files
FPV aspect ratio 16:9/4:3 switchable
Optimize TV-OUT interference to reduce ripple
Super WDR FPV image with low latency (40ms)
TV Mode: NTSC (720*480)/PAL (720*576) Switchable

Specifications of VTX 
A01 VTX board is lighter and perfectly suitable for canopy with switchable output power between 25mW and 200mW. SmartAudio is available for VTX remote control in default.

Output power: 25mW and 200mW (Adjustable)
Smart Audio function is included for radio control
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz

1 * HX115 115mm HD Quad
1 * HQ 3030 3-Blade Props (4pcs)
1 * HQ 3020 2-Blade Props (4pcs)
1 * Runcam OSD board and cable
1 * Set of M2 screws 
*Battery is NOT included. It comes with two sets of 3'' props without pre-installed, props at your disposal.




My Cart