Lumenier Mini 4Power + Plus PDB (20x20mm, 5v/8v Reg, 100A Curr.)

XT30コネクター付き

Lumenier Mini 4Power + Plus PDB (20x20mm, 5v/8v Reg, 100A Curr.)

Features

Input voltage range (3S-5S operation): 8 - 21VDC

PDB: 4x20A (Max.4x25A)

Regulated 5V (1.5A, 2A Max) and 10V (2A, 2A Max) outputs

Current Sensor ~100A (Output Voltage Scaling is 317)

Specifications

2oz copper, 4-layers &1.6mm PCB.

1x Battery input, 4x ESC outputs. 2x BEC 5V outputs, 1x BEC 8V outputs.

Current Sensor, Gnd pads, Video Transmitter Signal & Gnd pads

Dimensions: 30x28(+8 with XT30)x4mm, Weight: 4.5g

Mounting holes 20mm square spacing,Φ3mm

PDB (ESC outputs)

Continuous current: 20A per output Peak current (10 seconds/minute): 25A Max per output

BEC 5V Outputs

Designed for RC Receivers, Flight controllers, OSD, and Servos.

DC/DC synchronous buck regulator.

Voltage: 5.0 +/- 0.1VDC

Continuous current: 1.5 Amps (Max.2A 10s/minute)

Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)

Short-circuit tolerant (5 seconds/minute)

BEC 8V Output

Linear regulator, very low noise. LC Filter is needless.

Designed for Video TX or FPV camera.

Stable power output even on low voltage 3s (below 12v)

Voltage: 8.0V +/- 0.3VDC (4~5S operation)

Continuous current: 1.5A@16V IN (2A Max)

Short-circuit tolerant (2 seconds/minute)

Current Sensor

~100A

Includes

1x Lumenier Mini 4Power + Plus PDB

1x XT30 power connector