RCX H2205 2633kv Outrunner Brushless Motor V3



Model: H2205-4
KV: 2633KV
Weight: Approx. 24-25g (net weight included long AWG cables)
you can lower the weight if you shorten the long AWG cables.
AWG Cable: 15cm
Prop Shaft Diameter: 5mm (CW)
Stator Diameter: 22mm
Stator Length: 5mm
Shaft Diameter: 3mm
Configuration: 12N14P
Motor Dimensions: Φ26.6*15.3mm
ldle Current: 0.86A @ 10V
Internal Resistance: 0.081Ω
Suitable ESC: 10-30A (depends on the propeller and battery you use)
HobbyWing's XRotor works pretty well with H2205 motor so it is recommended especially the XRotor 20A is small in size as small as some 10A-12A ESC.
Since SimonK and BLHeli might shutter during high RPM on small props (eg. 5030). So if you plan to drive the motor hard, please consider to get XRotor 20A or 40A because XRotor was tested at high RPM without any sync issue.
Suitable Battery: 3-4S Li-Po



My Cart