RCX H2206-6 1950KV Micro Outrunner Brushless Motor



Model: H2206-6
KV: 1950KV
Weight: Approx. 32g (net weight included long AWG cables)
Prop Shaft Diameter: 5mm (no prop adapter is required for most 5mm props)
Clockwise Screw Thread
Stator Diameter: 22mm
Stator Length: 6mm
Shaft Diameter: 3mm
Motor Dimensions: Φ--mm
Configuration: 12N14P
Max Continuous Current: Approx. --
Max. Continuous Power: Approx. --
ldle Current: 0.0A
Internal Resistance: 82mΩ
Suitable ESC: 8-20A (depends on the prop you use)
HobbyWing's XRotor works pretty well with H2206 motor so it is recommended especially the XRotor 20A is small in size as small as some 10A-12A ESC.
Since SimonK and BLHeli might shutter during high RPM on small props (eg. 5030). So if you plan to drive the motor hard, please consider to get XRotor 20A or 40A because XRotor was tested at high RPM without any sync issue.
Suitable Battery: 2-4S Li-Po



My Cart