RCX H2205 2350kv Outrunner Brushless Motor


This H2205 stands between 1806 and 2206 motor, for those who needs higher thrust than 1806 motor but less weight than 2206. This 2350KV is suitable for both

6 inch propeller on 3S
5 inch propeller on 3S - 5S


Model: H2205-6
KV: 2350KV
Weight: Approx. 24-25g (net weight included long AWG cables)
you can lower the weight if you shorten the long AWG cables.
AWG Cable: 15cm
Prop Shaft Diameter: 5mm (CW)
Stator Diameter: 22mm
Stator Length: 5mm
Shaft Diameter: 3mm
Configuration: 12N14P
Motor Dimensions: Φ26.6*15.3mm
ldle Current: 0.79A @ 10V
Internal Resistance: 0.109Ω
Suitable ESC: 10-20A (depends on the propeller and battery you use)
HobbyWing's XRotor works pretty well with H2205 motor so it is recommended especially the XRotor 20A is small in size as small as some 10A-12A ESC.
Since SimonK and BLHeli might shutter during high RPM on small props (eg. 5030). So if you plan to drive the motor hard, please consider to get XRotor 20A or 40A because XRotor was tested at high RPM without any sync issue.
Suitable Battery: 3-5S Li-Po 


Package Included

1 x RCX H2205-6 2350KV Micro Outrunner Brushless Motor
1 x Hex Locknuts M5 (Slip-Resistant) - CW
1 x Circle Plate
1 x Set of M3*5 Screw



My Cart